XTZ-150К-09.172.00

Tractor description

T150K - the legendary universal tractor, which has been produced for 50 years.
The modern look of the XTZ-150K-09.172.00 tractor in combination with the latest agricultural implements allows carrying out a full range of works in the agrosphere.
XTZ-150K-09.172.00 undoubted advantage is its low cost maintenance.
Use:
- Agriculture: soil cultivation, sowing, harvesting, transportation, fodder conservation;
- Special-purpose machinery: maintenance of power lines, transportation of railway trains (the tractor completely replaces the locomotive);
- Forestry.

Technical specifications

Engine
Engine model	YaMZ-236
Environmental class	0
Working volume, l.	11,15
Rated power, kW (hp)	132 (180)
Rated speed (rpm)	2100
Maximum torque Nm/rpm	667/1250-1450
Number of cylinders, pcs.	6
Fuel rate at rated engine power	227 (167)
Fuel system type	High pressure fuel pump
Chassis
Wheel formula	All Wheel Drive (4WD)
Transmission	PowerShift 12/4
Maximum transport speed, km/h	30,08
Working speeds, km/h	I – (3,36-6,03) II– (7,08-12,67) III – (16,27-30,08)
Tires front/rear	21,3 R 24 FD-14 ANS10
Track gauge, mm.	1680 / 1860
Turning radius, m.	6,5
Agrotechnical clearance	400
Hydraulic system
Type of hydraulic system	Combined with one hydraulic pump and a single hydraulic tank
Pump output (l/min)	100
Number of pairs of pins	4
Single Section Throughput hydrodistributor, l/min	0 - 100 mechanical adjustment of each section
Sections of work with hydraulic motors, pcs.	2
Maximum fluid flow for working with hydraulic motors, l/min	55
Hinged system
Type of attachment system	Articulated linkage with longitudinal links and hook grips
Sizes of connecting balls, mm	32 × 51 - upper link, 37 × 45 - lower link
Max. carrying capacity, kg	5000
PTO
PTO Type	independent
PTO Type	Independent. Single stage gearbox with hydraulic clutch inclusion and oil cooling heat exchanger
PTO rotation speed, rpm	540 / 1000
Number of shank splines	20 (45 mm) involute - mounted on the tractor, 8 (38 mm) straight-line - it is applied to the set of spare parts
Electrical system
Voltage	12
Starter voltage	24
Accumulator battery	6СТ-190А3, 2 pcs
Dimensions and weight
Length, width, height, mm.	6596, 2460, 3490
Operating weight (without ballast), kg	8460
Refueling capacities
Fuel tank, l	430

Tractor aggregates

→ Tillage
→ Sowing
→ Transportation

→ Plough
→ Harrows
→ Panbuster
→ Cultivators
→ Tillage outfit
→ Сoupling
→ Roller
→ Grain seeding machine
→ Sowing unit
→ Trailers
	Swing plow PON-5 It is used for plowing the soil that is not clogged with rocks and other obstacles, for sowing grain and industrial crops to the depth of 30 cm with soil resistivity up to 0.9 MPa.... Details
	2-row disc harrow Pallada 4000 It is used for resource-saving pre-sowing soil cultivation for sowing cereals, technical and forage crops, destroying weeds and chopping crop residues after harvesting of sowing crops, as well as chopping, leveling and c... Details
	4-row disc harrow Antares 3x4 It is used for resource-saving pre-sowing tillage for sowing cereals, technical and fodder crops, destroying weeds and chopping crop residues after harvesting sowing crops, as well as chopping, leveling and packing the s... Details
	Cultivator KPG 8.2 It is designed for a complete secondary tillage and cultivation of fallow lands with simultaneous harrowing and plying-down of the soil with unit resistance of up to 0.5 kgf/cm² (0.05 mPas) and humidity of up to 27%... Details
	Deep tiller Frank The machine cultivates the soil at great depth without turning the layers and leaving 30 to 60% of plant remains on the surface, which solves the problem of soil erosion, preserving the organic composition of the soil an... Details
	Disc harrow KRONOS 4-5 The compact disc harrow KRONOS has a wide range of usages, covering stubble cultivation, medium-depth soil cultivation, pre-sowing preparation, and cutting of perennial grasses and layland.... Details
	Disc hydraulic skim plow LDG-10M and LDG-15M It is used for loosening of untreated soil of different mechanical composition, grinding of post-harvest residuals of long-stemmed crops, cutting the weed and other plants on untreated fields after harvesting the main cr... Details
	Disc mounted plow PD 3.3 It is used for preparing the soil that is not clogged with rocks and other obstacles, for sowing grain and industrial crops by loosening the field surface to a specified depth with soil resistivity up to 0.9 kg/cm² ... Details
	Disc plow PDM 3.3 It is used for preparing the soil that is not clogged with rocks and other obstacles, for sowing grain and industrial crops by loosening the field surface to a specified depth with soil resistivity up to 0.9 kg/cm² ... Details
	Disk heavy harrow BDV-4,2-01 Purpose: loosening of packed, untreated soils of different mechanical condition, cutting of a layer of perennial grasses, managing the turfy clots after plowing with weed cutting, grinding of post-harvest cereal and larg... Details
	Disk heavy harrow BDV-7 Purpose: loosening of packed, untreated soils of different mechanical condition, cutting of a layer of perennial grasses, managing the turfy clots after plowing with weed cutting, grinding of post-harvest cereal and larg... Details
	Dump truck semi-trailer NTS-10 Semi-trailers are used for transportation of bulk, lump and piece cargo of agricultural and other nature. Those are transported on common roads and field roads. The unloading is backwards, the rear side opens with hydrau... Details
	Heavy toothed harrow Lira XL The machine allows you to perform 5 operations in one run. For example, early spring harrowing and loosening of the surface layer to a depth of 2-10 cm while simultaneously: • sealing the moist; • provoking t... Details
	Hydroficated towbar SGP-21 It is used to form a machine with a working width up to 21 m from the mounted tooth harrow BZS-1,0 (BZTS-1,0, BZTU-1,0). It is used to seal the water during the pre-sowing harrowing period.... Details
	Intensive stubble cultivator Shilling SHILLING is effective for soil treatment before and after cereals, legumes, and is also widely used in traditional treatment systems, for treating fallows and for presowing soil cultivation. Per one run the machine perfo... Details
	KPN-8 and KPP-8 field cultivator It is used for carrying out the continuous presowing tillage of the soil and processing of fallows with simultaneous crumbling of clods and packing of a surface with rollers.... Details
	KPP-8M and KPP-8.2 field cultivator It is used for carrying out the continuous presowing tillage of the soil and processing of fallows with simultaneous crushing of clods and pressing a surface with rollers.... Details
	Multipurpose pre sowing machine FORWARD 6 It is designed for a complete secondary tillage of the field after plowing and other preparation. After the single run the soil is perfectly ready for sowing, there’s no need for further preparation.... Details
	PARTNER-7.5 Sowing complex All of the sowing operations are carried out in one run. The soil is consistently treated with 4 rows of tools: a cultivator, spring harrows, rolling wheels and a weeder. After sowing the cultivator is unattached from th... Details
	PBN-30 Additional options Weighing system with printer (Dinamica Generale, Italy) Tent system (ground) PTO shaft with overload clutch (shear bolt) PVC hose Ø 400 mm., Length - 1.2 m. (for loading seeders) Trailed ... Details
	Pneumatic universal seeder Vega 16 Profi It is used for accurate sowing of calibrated seeds of corn, sunflower, castor oil plant, sorghum, soybeans, as well as seeds of forage beans, beans, lupine with simultaneous, granular mineral fertilizers applied separate... Details
	Preseeding machine AP-6 It is used for early spring moisture sealing and cultivating of the soil with an even and inclined relief, preparing the soil for sowing of sugar beet, leguminous and vegetable crops. Per one run the machine performs the... Details
	Presowing cultivator Chervonets Creates an ideal seedbed: a packed layer, with a well-loosened soil on top. While being effective in small and large areas, it is a universal, classic tool for preparing the seedbed. It allows to simultaneously perform:... Details
	Roller KZK-10 and KZK-12,5 It is used for pre-sowing and post-sowing soil packing, grinding of the upper soil crust and partial leveling of the plowed field. The roller works at a humidity of 12-25%, the hardness of the soil in the treated layer s... Details
	Semi-mounted tillage machine AGM 4.2 It is used for preparing the soil for sowing grain and industrial crops by loosening the field surface to a specified depth with a soil resistivity of up to 0.9 kgf/cm², hardness of 35 kgf/cm² (3.5 MPa) and a h... Details
	Short disc harrow-cutter Dukat It is best suited for stubble treatment. It provides intensive mixing of the soil and plant mass to a depth of up to 14 cm.... Details
	Single-furrow mounted plow PNV-5.35 with a jointer It is used for preparing the soil that is not clogged with rocks and other obstacles, for sowing grain and industrial crops to the depth of 30 cm with soil resistivity up to 0.9 kg/cm² and hardness of 4,0 MPa.... Details
	Sowing complex, seeder Zlatnik Sowing complex ZLATNIK is a machine for soil preparation and sowing, used in all technologies: it can sow both in minimal and zero technologies thanks to the sowing unit with reinforced two-disc coulters. It is equipped ... Details
	Sowing machine Alcor 7,5 It is used for continuous sowing of cereals, grain legumes and other crops on traditional and minimal technologies of soil cultivation. The ALCOR complex performs 5 operations: • Cultivation and 100% weed cutting ... Details
	Straight seeding attachment to seeders Krona The Krona tillage machine allows using the traditional seeder as a straight sowing machine with minimal investment, which makes it possible to use it both in traditional and minimal tillage systems, including in no-till ... Details
	Swept deep tiller GRS-3.0 It is used for loosening the soil on single-furrow and nonmoldboard grounds with a deeper plough-layer, nonmoldboard soil tillage, instead of autumn and spring plowing and deep loosening on the slopes and fallow fields. ... Details
	TSP-20 dumping trailer TSP-20 tractor dumping trailer with 16 t capacity, V - 19,5-27,3 m3 Additional options Stripes of 500 mm height, V-27,3 m3 Tent system Replaceable drawbar ring Scharmuller (Austria) 385/65 R22,5 tires Potato belt... Details
	Water transportation machine APV-10 APV is a tank with a centrifugal pump. It is used for self-filling, transportation, distribution of water on livestock farms, in summer camps and on walking grounds. The tank may be used for pumping water and other liqui... Details
← Return