XTZ-243К.20 is a further modernized version of the T-150K tractor. In the process of creation, the latest technologies were used, which allowed modifying the transmission, hydraulics, as well as a linkage system for efficient use of the tractor together with modern high-speed agricultural attachments. Specially designed new ergonomic design, in combination with the new lining allows to increase the operator's working zone of visibility, as well as to simplify access to the main components of the machine.
The undoubted advantage of XTZ-243K.20 tractor is the low cost of ownership.
The tractor is mainly used in agriculture: basic tillage, sowing, harvesting, transportation, forage preparation.
New engine - six-cylinder, in-line, powerful - 250 hp, modern - Common Rail system, eco-friendly - Stage III A, economical - 157 g.kW/h engine.
Gearbox - upgraded oil purification system - a new filter was used with a term of service extended from 250 to 500 mt.h., a by-pass valve was moved to an accessible location, the oil filler neck was moved.
Cabin - the tint film was applied, the parking crane (handbrake) was moved, the sunshade curtain was installed, the engine oil pressure, the coolant temperature sensors were installed.
Lining - the longitudinal adjustment of hood loops has been installed, the hood opening angle (pneumatic spring) has been increased, the hood stiffness has been increased, the handrails on the radiator have been installed.
|Working volume, l.
|Rated power, kW (hp)
|Rated speed (rpm)
|Maximum torque Nm/rpm
|Number of cylinders, pcs.
|Fuel rate at rated engine power
|Fuel system type
||All Wheel Drive (4WD)
|Maximum transport speed, km/h
|Working speeds, km/h
||I – (3,37-6,64), II– (7,78-13,95), III – (17,9-33,67)
||23,1 R26 F-37 НС10
|Track gauge, mm.
|Turning radius, m.
|Type of hydraulic system
||Combined with one hydraulic pump and a single hydraulic tank
|Pump output (l/min)
|Number of pairs of pins
|Single Section Throughput hydrodistributor, l/min
||0 - 100 mechanical adjustment of each section
|Sections of work with hydraulic motors, pcs.
|Maximum fluid flow for working with hydraulic motors, l/min
|Type of attachment system
||Articulated linkage with longitudinal links and hook grips
|Sizes of connecting balls, mm
||32 × 51 - upper link, 37 × 45 - lower link
|Max. carrying capacity, kg
||Independent. Single stage gearbox with hydraulic clutch inclusion and oil cooling heat exchanger
|PTO rotation speed, rpm
||540 / 1000
|Number of shank splines
||20 (45 mm) involute - mounted on the tractor, 8 (38 mm) straight-line - it is applied to the set of spare parts
||6СТ-190А3, 2 pcs
|Length, width, height, mm.
||6596, 2460, 3565
|Operating weight (without ballast), kg
|Fuel tank, l