XТZ-181.22

Tractor description

XTZ-181.22 is an upgraded version of the T-150-05-09 tractor, which, combined with a modified transmission, chassis (rubber track - 1 680 mm.,), control systems, ergonomic design and increased comfort for the operator allows the tractor to be used in modern Agricultural technologies with a higher driving force.
The undoubted advantage of the XTZ-181.22 crawler tractor is its low cost maintenance.
Use:
- agricultural operations: basic tillage, sowing;

Technical specifications

Engine
Engine model	YaMZ-238
Environmental class	0
Working volume, l.	14,86
Rated power, kW (hp)	140 (190)
Rated speed (rpm)	2100
Maximum torque Nm/rpm	883/1250-1450
Number of cylinders, pcs.	8
Fuel rate at rated engine power	227 (167)
Fuel system type	High pressure fuel pump
Chassis
Wheel formula	Tracked, with torsion-balanced suspension
Transmission	PowerShift 9/3
Maximum transport speed, km/h	16,40
Working speeds, km/h	I – (4,56-6,29) II– (7,20-9,94) III – (11,88-16,40)
Сaterpillar	Rubber track, 645 mm
Track gauge, mm.	1680
Turning radius, m.	2,75
Agrotechnical clearance	300
Hydraulic system
Type of hydraulic system	With one hydraulic pump and single hydraulic tank
Pump output (l/min)	130
Number of pairs of pins	4
Single Section Throughput hydrodistributor, l/min	0 - 100 mechanical adjustment of each section
Sections of work with hydraulic motors, pcs.	2
Maximum fluid flow for working with hydraulic motors, l/min	70
Hinged system
Type of attachment system	Articulated linkage with longitudinal links and hook grips
Sizes of connecting balls, mm	32 × 51 - upper link, 37 × 45 - lower link
Max. carrying capacity, kg	4200
PTO
PTO Type	independent. Single stage gearbox
PTO rotation speed, rpm	540 / 1000
Electrical system
Voltage	12
Starter voltage	24
Accumulator battery	6СТ-190А3, 2 pcs
Dimensions and weight
Length, width, height, mm.	5700, 2325, 3185
Operating weight (without ballast), kg	12120
Refueling capacities
Fuel tank, l	430

Tractor aggregates

→ Tillage
→ Sowing
→ Plough
→ Harrows
→ Panbuster
→ Cultivators
→ Tillage outfit
→ Сoupling
→ Roller
→ Grain seeding machine
→ Sowing unit
	2-row disc harrow Pallada 4000 It is used for resource-saving pre-sowing soil cultivation for sowing cereals, technical and forage crops, destroying weeds and chopping crop residues after harvesting of sowing crops, as well as chopping, leveling and c... Details
	2-row disc harrow Pallada 6000 It is used for resource-saving pre-sowing soil cultivation for sowing grain, technical and forage crops, destroying weeds and chopping crop residues after harvesting sowing crops, as well as chopping, leveling and packin... Details
	4-row disc harrow Antares 3x4 It is used for resource-saving pre-sowing tillage for sowing cereals, technical and fodder crops, destroying weeds and chopping crop residues after harvesting sowing crops, as well as chopping, leveling and packing the s... Details
	4-row disc harrow Antares 4x4 It is used for resource-saving pre-sowing soil cultivation for sowing grain, technical and forage crops, destroying weeds and chopping crop residues after harvesting sowing crops, as well as chopping, leveling and packin... Details
	Cultivator KPG 8.2 It is designed for a complete secondary tillage and cultivation of fallow lands with simultaneous harrowing and plying-down of the soil with unit resistance of up to 0.5 kgf/cm² (0.05 mPas) and humidity of up to 27%... Details
	Cultivator KPG-11 It is designed for a complete secondary tillage and cultivation of fallow lands with simultaneous harrowing and plying-down of the soil with unit resistance of up to 0.5 kgf/cm² (0.05 mPas) and humidity of up to 27%... Details
	Deep tiller Frank The machine cultivates the soil at great depth without turning the layers and leaving 30 to 60% of plant remains on the surface, which solves the problem of soil erosion, preserving the organic composition of the soil an... Details
	Disc harrow KRONOS 4-5 The compact disc harrow KRONOS has a wide range of usages, covering stubble cultivation, medium-depth soil cultivation, pre-sowing preparation, and cutting of perennial grasses and layland.... Details
	Disc harrow KRONOS 5-6 The compact disc harrow KRONOS has a wide range of applications, covering stubble cultivation, medium-depth soil cultivation, pre-sowing preparation, as well as cutting of perennial grasses and layland.... Details
	Disc harrow ZEUS HD The universal disc harrow ZEUS HD was specially designed for working in harsh operating conditions: crop residues, overconsolidated soil, dry period, etc. The machine`s working elements spaced apart in four rows are att... Details
	Disc hydraulic skim plow LDG-10M and LDG-15M It is used for loosening of untreated soil of different mechanical composition, grinding of post-harvest residuals of long-stemmed crops, cutting the weed and other plants on untreated fields after harvesting the main cr... Details
	Disc mounted plow PD 3.3 It is used for preparing the soil that is not clogged with rocks and other obstacles, for sowing grain and industrial crops by loosening the field surface to a specified depth with soil resistivity up to 0.9 kg/cm² ... Details
	Disc plow PDM 3.3 It is used for preparing the soil that is not clogged with rocks and other obstacles, for sowing grain and industrial crops by loosening the field surface to a specified depth with soil resistivity up to 0.9 kg/cm² ... Details
	Disk heavy harrow BDV-4,2-01 Purpose: loosening of packed, untreated soils of different mechanical condition, cutting of a layer of perennial grasses, managing the turfy clots after plowing with weed cutting, grinding of post-harvest cereal and larg... Details
	Disk heavy harrow BDV-7 Purpose: loosening of packed, untreated soils of different mechanical condition, cutting of a layer of perennial grasses, managing the turfy clots after plowing with weed cutting, grinding of post-harvest cereal and larg... Details
	Favorit 3 With the Favorit subsoiler you can intensively plough the lower soil layers without turning the layer and simultaneously crushing and mixing the upper layer. The aggressive shanks position provides deep retraction and i... Details
	GALAXI AGROKALINA The GALAXI Agromash-Kalina seeding complex has a versatile range of applications - after plowing, minimal tillage, direct sowing. High productivity - less pulling power required, working speeds from 10 to 20 km/h, large... Details
	Hydroficated towbar SGP-21 It is used to form a machine with a working width up to 21 m from the mounted tooth harrow BZS-1,0 (BZTS-1,0, BZTU-1,0). It is used to seal the water during the pre-sowing harrowing period.... Details
	Intensive stubble cultivator Shilling SHILLING is effective for soil treatment before and after cereals, legumes, and is also widely used in traditional treatment systems, for treating fallows and for presowing soil cultivation. Per one run the machine perfo... Details
	KPN-8 and KPP-8 field cultivator It is used for carrying out the continuous presowing tillage of the soil and processing of fallows with simultaneous crumbling of clods and packing of a surface with rollers.... Details
	KPP-8M and KPP-8.2 field cultivator It is used for carrying out the continuous presowing tillage of the soil and processing of fallows with simultaneous crushing of clods and pressing a surface with rollers.... Details
	Mechanical grain seeder SZM Nika-6 The mechanical grain seeder SZM Nika-6 is designed for row seeding of cereals, herbs, vegetables, mixtures, legumes, industrial and other crops using the minimum tillage technology, with a force of pressure on the colter... Details
	Multipurpose pre sowing machine FORWARD 6 It is designed for a complete secondary tillage of the field after plowing and other preparation. After the single run the soil is perfectly ready for sowing, there’s no need for further preparation.... Details
	PARTNER-7.5 Sowing complex All of the sowing operations are carried out in one run. The soil is consistently treated with 4 rows of tools: a cultivator, spring harrows, rolling wheels and a weeder. After sowing the cultivator is unattached from th... Details
	PARTNER-9 Sowing complex All of the sowing operations are carried out in one run. The soil is consistently treated with 4 rows of tools: a cultivator, spring harrows, rolling wheels and a weeder. After sowing the cultivator is unattached from th... Details
	Pinocchio The PINOCCHIO model is designed for low or medium power tractors (from 70 hp), and has a maximum working depth of 45 cm. PINOCCHIO is available in different working widths and different shank number, just right for smal... Details
	Pneumatic universal seeder Vega 16 Profi It is used for accurate sowing of calibrated seeds of corn, sunflower, castor oil plant, sorghum, soybeans, as well as seeds of forage beans, beans, lupine with simultaneous, granular mineral fertilizers applied separate... Details
	Preseeding machine AP-6 It is used for early spring moisture sealing and cultivating of the soil with an even and inclined relief, preparing the soil for sowing of sugar beet, leguminous and vegetable crops. Per one run the machine performs the... Details
	Presowing cultivator Chervonets Creates an ideal seedbed: a packed layer, with a well-loosened soil on top. While being effective in small and large areas, it is a universal, classic tool for preparing the seedbed. It allows to simultaneously perform:... Details
	Roller KZK-10 and KZK-12,5 It is used for pre-sowing and post-sowing soil packing, grinding of the upper soil crust and partial leveling of the plowed field. The roller works at a humidity of 12-25%, the hardness of the soil in the treated layer s... Details
	Semi-mounted tillage machine AGM 4.2 It is used for preparing the soil for sowing grain and industrial crops by loosening the field surface to a specified depth with a soil resistivity of up to 0.9 kgf/cm², hardness of 35 kgf/cm² (3.5 MPa) and a h... Details
	Sowing machine Alcor 7,5 It is used for continuous sowing of cereals, grain legumes and other crops on traditional and minimal technologies of soil cultivation. The ALCOR complex performs 5 operations: • Cultivation and 100% weed cutting ... Details
	SPIDER 7G SPIDER Moro Aratri is a line of subsoilers from the Italian brand Moro Aratri. The subsoiler is designed to break the plow sole and prepare the soil for sowing. The unit busts the soil up to 65 cm deep and simultaneous... Details
	Swept deep tiller GRS-3.0 It is used for loosening the soil on single-furrow and nonmoldboard grounds with a deeper plough-layer, nonmoldboard soil tillage, instead of autumn and spring plowing and deep loosening on the slopes and fallow fields. ... Details
	Universal tillage machine AGK 5.4 AGK-5.4 machine combined with working increased resource units, providing a pressure of more than 170 kg on 1 disc, is used for treating the packed soils, removing the weed and chopping plant residues after harvesting th... Details
← Return